plz series www.vishay.com vishay semiconductors rev. 1.2. 29-nov-16 1 document number: 84830 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 zener diodes permitting 500 mw power dissipation features ? sillicon planar zener diodes, ultra small ? low profile do-219ac (microsmf) package ? low leakage current ? excellent stability ? high temperature soldering: 260 c / 10 s at terminals ? wave and reflow solderable (reflow as per jpc / jedec ? j-std 020) (double wave as per iec 61760-1) ? aec-q101 qualified available ? base p/n-g3 - rohs-compliant, green, industrial grade ? base p/n-hg3 - rohs-compliant, green, aec-q101 qualified ? esd immunity acc. iec 61000-4-2 acc. to part table ? surge performance ac c. to part table ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 primary characteristics parameter value unit v z range nom. 2.0 to 39 v test current i zt 5 to 20 ma v z specification pulse current int. constr uction single 20278 1 2 ordering information device name ordering code taped units per reel minimum order quantity plz-series part number-g3/h 4500 per 7" reel (8 mm tape) 22 500 / box plz-series part number-hg3/h package package name weight molding compound flammability rating moisture sensitivity level soldering conditions do-219ac (microsmf) 4.8 mg ul 94 v-0 msl level 1 (a ccording j-std-020) 260 c / 10 s at terminals absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit power di ssipation mounted on fr4 board 50 mm x 50 mm x 1.6 mm, solder land 10 mm x 10 mm, t amb = 85 c p tot 500 mw power di ssipation mounted on fr4 board 50 mm x 50 mm x 1.6 mm, solder land 10 mm x 10 mm, t amb = 25 c p tot 960 power di ssipation mounted on fr4 board with recommended soldering footpads (reflow) p tot 340 non-repetitive peak su rge power dissipation t p = 8/20 s acc. iec 61000-4- 5 (plz5v1a to plz39d) p zsm 100 w t p = 8/20 s acc. iec 61000-4-5 (plz2v0a to plz4v7c) p zsm 70 w z-current i z p tot /v z ma junction temperature t j 150 c storage temperature range t stg -55 to +150 thermal characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit typ. thermal resistance junction to ambient air mounted on fr4 board 50 mm x 50 mm x 1.6 mm, solder land 10 mm x 10 mm r thja 130 k/w typ. thermal resistance junction to lead r thjl 40 k/w electrical specifications (t amb = 25 c, unless otherwise specified) parameter test condition symbol min. typ. max. unit forward voltage i f = 10 ma v f 0.8 0.9 v
plz series www.vishay.com vishay semiconductors rev. 1.2. 29-nov-16 2 document number: 84830 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) pulse test: t p ? 40 ms (2) pulse test: t p = 8/20 s acc. iec 61000-4-5 (3) contact and air discha rge acc. iec 61000-4-2 electrical characteristics (t amb = 25 c, unless otherwise specified) part number marking code zener voltage range (1) test current reverse current dynamic resistance peak pulse current (2) reverse clamping voltage at i ppm esd immunity (3) v z at i zt i zt1 i r at v r z z at i zt i ppm v c v esd v ma a v ? a v kv min. max. max. max. max. max. plz2v0a 2a0 1.88 2.10 20 120 0.5 140 12.4 5.65 20 plz2v0b 2b0 2.02 2.20 20 12.2 5.71 20 plz2v2a 2a2 2.12 2.30 20 120 0.7 120 12.1 5.76 20 plz2v2b 2b2 2.22 2.41 20 12.1 5.77 20 plz2v4a 2a4 2.33 2.52 20 120 1.0 100 12.1 5.78 ? 30 plz2v4b 2b4 2.43 2.63 20 12.1 5.79 ? 30 plz2v7a 2a7 2.54 2.75 20 100 1.0 100 11.8 5.91 ? 30 plz2v7b 2b7 2.69 2.91 20 11.7 5.98 ? 30 plz3v0a 3a0 2.85 3.07 20 20 1.0 80 11.6 6.02 ? 30 plz3v0b 3b0 3.01 3.22 20 11.3 6.18 ? 30 plz3v3a 3a3 3.16 3.38 20 10 1.0 70 11.2 6.22 ? 30 plz3v3b 3b3 3.32 3.53 20 11.1 6.29 ? 30 plz3v6a 3a6 3.455 3.695 20 51.0 60 10.9 6.40 ? 30 plz3v6b 3b6 3.60 3.845 20 10.8 6.47 ? 30 plz3v9a 3a9 3.74 4.10 20 51.0 50 10.7 6.54 ? 30 plz3v9b 3b9 3.89 4.16 20 10.6 6.60 ? 30 plz4v3a 4a3 4.04 4.29 20 51.0 40 10.5 6.66 ? 30 plz4v3b 4b3 4.17 4.43 20 10.4 6.73 ? 30 plz4v3c 4c3 4.30 4.57 20 10.3 6.80 ? 30 plz4v7a 4a7 4.44 4.68 20 51.0 25 10.1 6.93 ? 30 plz4v7b 4b7 4.55 4.80 20 9.9 7.06 ? 30 plz4v7c 4c7 4.68 4.93 20 9.4 7.40 ? 30 plz5v1a 5a1 4.81 5.07 20 51.5 20 12.3 8.14 ? 30 plz5v1b 5b1 4.94 5.20 20 12.1 8.23 ? 30 plz5v1c 5c1 5.09 5.37 20 11.9 8.40 ? 30 plz5v6a 5a6 5.28 5.55 20 52.5 13 11.6 8.61 ? 30 plz5v6b 5b6 5.45 5.73 20 11.3 8.82 ? 30 plz5v6c 5c6 5.61 5.91 20 11.1 8.99 ? 30 plz6v2a 6a2 5.78 6.09 20 53.0 10 10.7 9.32 ? 30 plz6v2b 6b2 5.96 6.27 20 10.5 9.45 ? 30 plz6v2c 6c2 6.12 6.44 20 10.3 9.66 ? 30 plz6v8a 6a8 6.29 6.63 20 23.5 8 9.7 10.29 ? 30 plz6v8b 6b8 6.49 6.83 20 9.5 10.50 ? 30 plz6v8c 6c8 6.66 7.01 20 9.4 10.60 ? 30 plz7v5a 7a5 6.85 7.22 20 0.5 4.0 8 9.0 11.06 ? 30 plz7v5b 7b5 7.07 7.45 20 8.8 11.34 ? 30 plz7v5c 7c5 7.29 7.67 20 8.6 11.54 ? 30 plz8v2a 8a2 7.53 7.92 20 0.5 5.0 8 8.4 11.80 ? 30 plz8v2b 8b2 7.78 8.19 20 8.3 12.00 ? 30 plz8v2c 8c2 8.03 8.45 20 7.9 12.60 ? 30 plz9v1a 9a1 8.29 8.73 20 0.5 6.0 8 7.8 12.86 ? 30 plz9v1b 9b1 8.57 9.01 20 7.6 13.17 ? 30 plz9v1c 9c1 8.83 9.30 20 7.4 13.55 ? 30
plz series www.vishay.com vishay semiconductors rev. 1.2. 29-nov-16 3 document number: 84830 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 electrical characteristics (t amb = 25 c, unless otherwise specified) part number marking code zener voltage range (1) test current reverse current dynamic resistance peak pulse current (2) reverse clamping voltage at i ppm esd immunity (3) v z at i zt i zt1 i r at v r z z at i zt i ppm v c v esd v ma a v ? a v kv min. max. max. max. max. max. plz10a 10a 9.12 9.59 20 0.2 7.0 8 7.09 14.1 ? 30 plz10b 10b 9.41 9.90 20 6.90 14.5 ? 30 plz10c 10c 9.70 10.20 20 6.75 14.8 ? 30 plz10d 10d 9.94 10.44 20 6.58 15.2 ? 30 plz11a 11a 10.18 10.71 10 0.2 8.0 10 6.47 15.5 ? 30 plz11b 11b 10.50 11.05 10 6.25 16.0 ? 30 plz11c 11c 10.82 11.38 10 6.10 16.4 ? 30 plz12a 12a 11.13 11.71 10 0.2 9.0 12 5.95 16.8 ? 30 plz12b 12b 11.44 12.03 10 5.80 17.2 ? 30 plz12c 12c 11.74 12.35 10 5.43 18.4 ? 30 plz13a 13a 12.11 12.75 10 0.2 10 14 5.29 18.9 ? 30 plz13b 13b 12.55 13.21 10 5.15 19.4 ? 30 PLZ13C 13c 12.99 13.66 10 5.05 19.8 ? 30 plz15a 15a 13.44 14.13 10 0.2 11 16 4.93 20.3 ? 30 plz15b 15b 13.89 14.62 10 4.76 21.0 ? 30 plz15c 15c 14.35 15.09 10 4.50 22.0 ? 30 plz16a 16a 14.80 15.57 10 0.2 12 18 4.25 23.5 ? 30 plz16b 16b 15.25 16.04 10 4.18 23.9 ? 30 plz16c 16c 15.69 16.51 10 3.96 25.2 ? 30 plz18a 18a 16.22 17.06 10 0.2 13 23 3.95 25.3 ? 30 plz18b 18b 16.82 17.70 10 3.77 26.5 ? 30 plz18c 18c 17.42 18.33 10 3.69 27.1 ? 30 plz20a 20a 18.02 18.96 10 0.2 15 28 3.43 29.1 ? 30 plz20b 20b 18.63 19.59 10 3.40 29.4 ? 30 plz20c 20c 19.23 20.22 10 3.33 30.0 ? 30 plz20d 20d 19.72 20.72 10 3.18 31.4 ? 30 plz22a 22a 20.15 21.20 5 0.2 17 30 3.13 31.9 ? 30 plz22b 22b 20.64 21.71 5 3.07 32.6 ? 30 plz22c 22c 21.08 22.17 5 2.82 35.4 25 plz22d 22d 21.52 22.63 5 2.80 35.6 25 plz24a 24a 22.05 23.18 5 0.2 19 35 2.77 36.1 25 plz24b 24b 22.61 23.77 5 2.70 37.0 25 plz24c 24c 23.12 24.31 5 2.64 37.8 25 plz24d 24d 23.63 24.85 5 2.61 38.3 25 plz27a 27a 24.26 25.52 5 0.2 21 45 2.55 39.2 25 plz27b 27b 24.97 26.26 5 2.49 40.1 25 plz27c 27c 25.63 26.95 5 2.32 43.0 20 plz27d 27d 26.29 27.64 5 2.30 43.5 20 notes (1) pulse test: t p ? 40 ms (2) pulse test: t p = 8/20 s acc. iec 61000-4-5 (3) contact and air discharge acc. iec 61000-4-2
plz series www.vishay.com vishay semiconductors rev. 1.2. 29-nov-16 4 document number: 84830 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - esd discharge current wave form acc. iec 61000-4-2 (330 ?? / 150 pf) fig. 2 - 8/20 s peak pulse curr ent wave form acc. iec 61000-4-5 plz30a 30a 26.99 28.39 5 0.2 23 55 2.28 43.7 20 plz30b 30b 27.70 29.13 5 2.21 45.2 20 plz30c 30c 28.36 29.82 5 2.21 45.5 20 plz30d 30d 29.02 30.51 5 2.20 46.3 20 plz33a 33a 29.68 31.22 5 0.2 25 65 2.10 47.6 20 plz33b 33b 30.32 31.88 5 1.94 51.6 15 plz33c 33c 30.90 32.50 5 1.91 52.2 15 plz33d 33d 31.49 33.11 5 1.91 52.2 15 plz36a 36a 32.14 33.79 5 0.2 27 75 1.88 53.1 15 plz36b 36b 32.79 34.49 5 1.78 55.9 15 plz36c 36c 33.40 35.13 5 1.76 56.7 15 plz36d 36d 34.01 35.77 5 1.75 56.9 15 plz39a 39a 34.68 36.47 5 0.2 30 85 1.74 57.2 15 plz39b 39b 35.36 37.19 5 1.74 57.4 15 plz39c 39c 36.00 37.85 5 1.70 58.7 15 plz39d 39d 36.63 38.20 5 1.67 59.9 15 electrical characteristics (t amb = 25 c, unless otherwise specified) part number marking code zener voltage range (1) test current reverse current dynamic resistance peak pulse current (2) reverse clamping voltage at i ppm esd immunity (3) v z at i zt i zt1 i r at v r z z at i zt i ppm v c v esd v ma a v ? a v kv min. max. max. max. max. max. notes (1) pulse test: t p ? 40 ms (2) pulse test: t p = 8/20 s acc. iec 61000-4-5 (3) contact and air discharge acc. iec 61000-4-2 10 100 1000 10000 0 20 40 60 80 100 120 -10 0 10 20 30 40 50 60 70 80 90 100 axis title 1st line 2nd line 2nd line i esd (%) t (ns) 2nd line rise time = 0.7 ns to 1 ns 53 27 20557 10 100 1000 10000 0 20 40 60 80 100 010203040 axis title 1st line 2nd line 2nd line i ppm (%) t (s) 2nd line 20 s to 50 % 8 s to 100 % 20548
plz series www.vishay.com vishay semiconductors rev. 1.2. 29-nov-16 5 document number: 84830 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 3 - maximum power dissipa tion vs. ambient temperature fig. 4 - typical forward current vs. forward voltage fig. 5 - thermal impedance vs. time fig. 6 - breakdown characteristics fig. 7 - breakdown characteristics fig. 8 - breakdown characteristics 22888 100 1000 10000 0 100 200 300 400 500 600 700 800 900 1000 050100150 axis title 1st line 2nd line p (w) t a (c) 2nd line r thja = 130 k/w r thja = 370 k/w 10 100 1000 10000 0.1 1 10 100 1000 00.511.52 axis title 1st line 2nd line 2nd line i f (ma) v f (v) 2nd line 22889 10 100 1000 10000 1 10 100 1000 0.001 0.01 0.1 1 10 100 1000 axis title 1st line 2nd line 2nd line z th - thermal impedance (k/w) t p - pulse width (s) 2nd line infinite heatsink 22890 footprint in mm 10 10 1st line 2nd line 22891 10 100 1000 10000 0 10 20 30 40 50 60 70 80 90 100 8101214 axis title 1st line 2nd line 2nd line i z (ma) v z (v) 2nd line plz10a plz10b plz10c plz10d plz11a plz11b plz11c plz12a plz12b plz12c 1st line 2nd line 22892 10 100 1000 10000 0 10 20 30 40 50 60 70 80 90 100 10 12 14 16 18 axis title 1st line 2nd line 2nd line i z (ma) v z (v) 2nd line plz13a plz13b PLZ13C plz15a plz15b plz15c plz16a plz16b plz16c 22893 10 100 1000 10000 0 10 20 30 40 50 60 14 16 18 20 22 24 axis title 1st line 2nd line 2nd line i z (ma) v z (v) 2nd line plz18a plz18b plz18c plz20a plz20b plz20c plz20d plz22a plz22b plz22c
plz series www.vishay.com vishay semiconductors rev. 1.2. 29-nov-16 6 document number: 84830 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 9 - breakdown characteristics fig. 10 - breakdown characteristics fig. 11 - breakdown characteristics 22894 10 100 1000 10000 0 10 20 30 40 50 20 22 24 26 28 30 axis title 1st line 2nd line 2nd line i z (ma) v z (v) 2nd line plz24a plz24b plz24c plz24d plz27a plz27b plz27c plz27d 22895 2nd line 2nd line 10 100 1000 10000 0 5 10 15 20 25 30 35 40 25 27 29 31 33 35 axis title 1st line 2nd line 2nd line i z (ma) v z (v) 2nd line plz30a plz30b plz30c plz30d plz33a plz33b plz33c plz33d 22896 10 100 1000 10000 0 5 10 15 20 25 30 30 32 34 36 38 40 axis title 1st line 2nd line 2nd line i z (ma) v z (v) 2nd line plz36a plz36b plz36c plz36d plz39a plz39b plz39c plz39d
plz series www.vishay.com vishay semiconductors rev. 1.2. 29-nov-16 7 document number: 84830 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters: do -219ac (microsmf) created - date: 02.dec.2010 rev. 5 - date: 06.may. 2014 document no.: s 8-v-3910.03-001 (4) foot print recommendation for wave s oldering: foot print recommendation for reflow s oldering: 22741 0.6 0.15 0.5 0.3 0.6 0.1 1.3 0.1 + 0.1 - 0.05 1.9 0.1 2.5 0.1 cathode bar 1.5 4.4 1.2 0.9 0.8 3.1
plz series www.vishay.com vishay semiconductors rev. 1.2. 29-nov-16 8 document number: 84830 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 blister tape dimensions in millimeters: do-219ac (microsmf) 4.00 0.10 4.00 0.10 2.00 0.05 ? 1.00 + 0.25 - 0.00 ? 1.50 + 0.10 - 0.00 8.00 + 0.3 - 0.1 3.50 0.05 1.75 0.10 0.229 0.02 12 max. 12 max. bo 2.79 0.10 ko 0.91 0.10 ao 1.68 0.10 top view cathode unreeling direction
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
